With the support of iLok, more tips & tricks from the community, this one is from Ralph Verdult….
Lately I tend to duplicate low-frequency based instruments, such as kicks, bass guitar, and double bass two or sometimes even three times. Each duplicate will work on a certain band on the frequency spectrum.
With a kick, for instance, I use the first track for the sub frequencies. I use a high-cut eq all the way down to somewhere between 60-100 Hz. The next track will be used for low-mids, and I will create the boundaries with a hi-pass (60-100 Hz) and a high cut (depends on the sound you’re after).
If’ you’re after a more snappy kick-sound, you can add another track for the click-sound that usually sits around 3,5 kHz. If you have these 2 or 3 separate tracks, you can use different kinds of compression and dynamics for each individual “band”. For instance you can get a solid and consistent sound from the sub of the kick with some heavy compression, while you leave the character in the low-mids more lively.
If you want to find all the community tips then just click on the Community Tip tag at the bottom of the story and you will get them all together in one page.
If you would like the chance to win a stormtrooper iLok courtesy of iLok then please submit it to us using the Contact Us page. Please check the content on the site before you send it in to make sure that the idea hasn’t already been covered.